Skip to Content


  1. All products
  2. CarPro
  3. Spotless 2.0
  4. CarPro
Pricelist: End User AED Pricelist
Pricelist: End User AED Pricelist
Spotless 2.0

Spotless 2.0

Spotless 2.0 uses an upgraded chemical formula with stronger acids to break down the mineral deposits on the surface before they can etch into the finish, thus negating the need for time consuming polishing, prolonging the life of the paint film.

Spotless’s proprietary blend of carefully balanced acids safely breaks down mineral deposits on most hard materials, and can even be used on CQUARTZ coatings, helping you keep your vehicle spot-free.

Spotless 2.0 is essential for preparing matte paint for coating and/or maintenance.

80.00 AED 80.00 AED
1.00 AED

  • Size
Add to cart
Buy now
INSTRUCTIONS

HOW TO USE

PAINTWORK

  • Wash the vehicle with Reset, rinse and dry the paint.
  • Work indoors or in the shade on cool panels. Prepare 2 damp Terry Weave Towels.
  • Spray Spotless 2.0 directly onto the panel or into 1 damp Terry Weave Towel and spread on the affected area.
  • Allow 30 seconds to 1 minute for Spotless 2.0 to breakdown the minerals on the surface before wiping the affected area to help loosen the mineral deposits.
  • Do not let the chemical dry on the surface, wipe off with a 2nd damp Terry Weave Towel or apply Spotless 2.0 again.
  • Repeat if necessary.
  • After cleaning each panel, thoroughly rinse the panel with running water and dry before moving to the next panel.

TEXTURED PLASTICS

  • Clean the plastics with Reset, rinse and dry.
  • Spray Spotless 2.0 directly on the the textured plastic or apply to a damp microfiber towel and wipe it onto the surface generously to allow it to get into the pores.
  • Allow Spotless 2.0 30 seconds to 1 minute to break down the mineral deposits and contamination before using a detailing brush to agitate and work the contamination out of the pores.
  • Repeat if necessary.
  • Rinse thoroughly with running water after clean each section and dry.

KEY FEATURES

  • New, updated formula with stronger acids
  • Effectively breaks down mineral deposits
  • Safe to use on a variety of surfaces

 

HOW TO USE

EMBLEMS & WHEELS

  • Clean the area with Reset, rinse and dry the surface.
  • Always test in an inconspicuous area first. Spray Spotless 2.0 onto an applicator, microfiber or brush of your choice and apply to affected area 1 section at a time.
  • Allow Spotless 2.0 to dwell on the affect area for 30 seconds to 1 minute without letting it dry before agitating to help break up the mineral deposits or stains.
  • Repeat if necessary.
  • Rinse thoroughly with running water after cleaning each area and dry.

GLASS

  • Apply Spotless 2.0 onto a Terry Weave Towel and spread on glass allowing to dwell for 30 seconds to 1 minute.
  • Use the same Terry Weave Towel to polish the glass to agitate the minerals or for stubborn water spots apply some Spotless 2.0 to a polishing pad and polish the glass by machine or by hand.
  • After spot removal thoroughly rinse the glass and adjacent panels with running water or wash with car shampoo and dry.

WARNING

  • Do NOT use in sun.
  • Do NOT use on hot surface.
  • Do NOT spray directly on glass. Use with caution, buff in and off instantly and neutralised.
  • May affect windscreen/window coatings and traditional sealants and waxes.